{"title":"BlackBox Rack Cases","description":"\u003cp\u003eThe BlackBox is Peli's light-duty, cost-optimised portable rack case, designed for solid-state electronics that need reliable environmental protection during transport but do not require the heavy shock isolation systems of the MAC Rack or SuperMAC. The textured rotomolded polyethylene shell presents a low-visibility military appearance and is interstackable with Super-V and Euro-V cases using compatible coupling catches — a critical interoperability feature for mixed-fleet logistics operations where different families of rack cases must travel on the same vehicle or pallet. The internal rack frame is available in 24-inch (61 cm) and 30-inch (76 cm) depths.\u003c\/p\u003e\n\n\u003ch2\u003eLight-Duty Protection in a Rugged Shell\u003c\/h2\u003e\n\u003cp\u003eThe BlackBox addresses a gap in the market between consumer-grade rack bags and bags (which offer almost no environmental protection) and full-shock-isolated military cases (which add significant weight and cost). Its standard 2-inch (5 cm) front lid and 5-inch (13 cm) rear lid provide cable egress space and some thermal management room for equipment that runs continuously inside the case. A closed-loop neoprene gasket and pressure relief valve provide IP67-equivalent sealing during transport, protecting equipment against dust ingress on desert tracks and rain exposure on open vehicle decks. The BlackBox is particularly well suited to solid-state IT equipment — managed switches, small servers, UPS units — where the main transport hazard is environmental rather than mechanical shock.\u003c\/p\u003e\n\n\u003ch2\u003eInteroperability and Range\u003c\/h2\u003e\n\u003cp\u003eThe BlackBox is available in seven standard U sizes: 3U, 4U, 5U, 7U, 9U, 11U, and 14U, with 30-inch depth options (BlackBox30) available in 3U, 5U, 7U, and 9U. Payload capacity ranges from approximately 9 kg (3U) to 45 kg (9U). The coupling catches on the case lid allow up to four BlackBox cases to be stacked in a stable column without additional strapping hardware. European distributors typically stock the 5U and 9U models as the highest-turnover configurations; the 3U BlackBox30 is increasingly specified for transport of 1U rack-mounted communications appliances with 29-inch chassis depths.\u003c\/p\u003e","products":[{"product_id":"peli-blackbox-4u-rack-mount-case","title":"Peli BlackBox 4U Rack Mount Case","description":"\u003cp\u003eThe Peli BlackBox 4U Rack Mount Case is a robust and lightweight enclosure designed to protect 19-inch rack-mountable equipment in professional and industrial environments. Constructed from high-strength Black-463 blended resin, the case offers excellent resistance to impact and environmental stress, providing reliable light to medium-duty protection with great value. Its rugged 24-inch (61 cm) steel rack frame, featuring 10-32 threaded holes and meeting ANSI\/EIA 310-C standards, supports payloads up to 45 kg with a typical fragility rating of 40-80G.\u003c\/p\u003e\n\u003cp\u003eEight cylindrical elastomeric shock mounts, attached directly to the case shoulders, provide 2 inches (5.1 cm) of sway space to isolate sensitive equipment from shocks and vibrations. The case has front and rear lids measuring 2.2 inches (5.6 cm) and 5.2 inches (13.2 cm) deep respectively, both equipped with molded-in 3.25-inch (82.6 mm) edge casters for smooth mobility. Four plastic comfort-grip handles ensure ergonomic handling and ease of transport.\u003c\/p\u003e\n\u003cp\u003eA molded-in rib design enhances stacking capability and stability, while spring-loaded stainless steel hardware finished in nickel black provides durability and secure closure. The closed-loop gasket and integrated pressure relief valve maintain internal environmental balance by protecting against dust and water ingress and equalizing pressure. The removable front and rear lids offer convenient dual access for easy installation and maintenance. The BlackBox 4U is ideal for audio\/video production equipment, satellite and radio communication systems, scientific instruments, and other professional electronic applications requiring portable, shock-resistant rack protection.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured in durable Black-463 blended resin\u003c\/li\u003e\n\u003cli\u003e24-inch (61 cm) deep steel rack frame with zinc black finish\u003c\/li\u003e\n\u003cli\u003eEight cylindrical elastomeric shock mounts for vibration isolation\u003c\/li\u003e\n\u003cli\u003eFour plastic comfort-grip handles for convenient transport\u003c\/li\u003e\n\u003cli\u003eMolded-in 3.25-inch (82.6 mm) edge casters for mobility\u003c\/li\u003e\n\u003cli\u003e2 inches (5.1 cm) of sway space for equipment protection\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear lids for dual-side access\u003c\/li\u003e\n\u003cli\u003eMolded-in rib design for secure stacking and interlocking\u003c\/li\u003e\n\u003cli\u003eSpring-loaded stainless steel hardware with nickel black finish\u003c\/li\u003e\n\u003cli\u003eClosed-loop gasket and integrated pressure relief valve\u003c\/li\u003e\n\u003cli\u003eSupports payloads up to 45.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drava Shop","offers":[{"title":"Default Title","offer_id":51403310989654,"sku":"BLACKBOX-4U-M6","price":1745.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/5641\/8969\/files\/peli-blackbox-rackmount-rack-case-4u.jpg?v=1758747829"},{"product_id":"peli-blackbox-11u-rack-mount-case","title":"Peli BlackBox 11U Rack Mount Case","description":"\u003cp\u003eThe Peli BlackBox 11U Rack Mount Case is a highly durable and versatile protective case designed for professionals who need secure transport and storage of 19-inch rack equipment in challenging environments. Manufactured from tough Black-463 blended resin, it provides excellent resistance against impacts and environmental stresses. The case includes a 24-inch (61 cm) depth light-duty steel rack frame finished with corrosion-resistant zinc black coating, compliant with ANSI\/EIA 310-C standards, and capable of supporting payloads ranging from 36.3 to 45.4 kg.\u003c\/p\u003e\n\u003cp\u003eInside, eight cylindrical elastomeric shock mounts are attached directly to the case shoulders, providing 2 inches (5.1 cm) of sway space that isolates and protects sensitive equipment from shocks and vibrations during transport and use. The front and rear lids have depths of 2.2 inches (5.6 cm) and 5.2 inches (13.2 cm) respectively, both equipped with molded-in 3.25-inch (82.6 mm) edge casters to facilitate easy maneuvering. Four plastic comfort-grip handles allow for ergonomic and convenient handling.\u003c\/p\u003e\n\u003cp\u003eThe case features a molded-in rib design enhancing stacking strength and interlocking stability. Spring-loaded stainless steel hardware with a nickel black finish ensures secure closure and long-lasting durability. The closed-loop gasket and integrated pressure relief valve maintain an airtight and watertight environment to protect equipment. Dual removable lids provide easy access from the front and rear, allowing for efficient installation and maintenance. The BlackBox 11U is well-suited for a wide array of professional applications including audio\/video production, satellite and radio communications, broadcast, scientific research, and industrial uses.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured in durable Black-463 blended resin\u003c\/li\u003e\n\u003cli\u003e24-inch (61 cm) depth light-duty steel rack frame with zinc black finish\u003c\/li\u003e\n\u003cli\u003eEight cylindrical elastomeric shock mounts for vibration isolation\u003c\/li\u003e\n\u003cli\u003eFour plastic comfort-grip handles for ergonomic transport\u003c\/li\u003e\n\u003cli\u003eMolded-in 3.25-inch (82.6 mm) edge casters for easy mobility\u003c\/li\u003e\n\u003cli\u003e2 inches (5.1 cm) of sway space for shock absorption\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear lids for dual-side access\u003c\/li\u003e\n\u003cli\u003eMolded-in rib design for secure stacking and interlock\u003c\/li\u003e\n\u003cli\u003eSpring-loaded stainless steel hardware with nickel black finish\u003c\/li\u003e\n\u003cli\u003eClosed-loop gasket and integrated pressure relief valve\u003c\/li\u003e\n\u003cli\u003eSupports payloads up to 45.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drava Shop","offers":[{"title":"Default Title","offer_id":51433252487510,"sku":"BLACKBOX-11U-M6","price":2214.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/5641\/8969\/files\/peli-blackbox-rackmount-rack-case-11u.jpg?v=1759051998"},{"product_id":"peli-blackbox-14u-rack-mount-case","title":"Peli BlackBox 14U Rack Mount Case","description":"\u003cp\u003eThe Peli BlackBox 14U Rack Mount Case is a tough and spacious protective enclosure, designed for professionals requiring secure transport and storage of 19-inch rack equipment in challenging environments. Constructed with high-performance Black-463 blended resin, this case delivers excellent impact resistance and durability for light to medium-duty applications. It is built around a 24-inch (61 cm) deep light-duty steel rack frame with a corrosion-resistant zinc black finish that meets ANSI\/EIA 310-C standards, supporting payloads up to 45.4 kg.\u003c\/p\u003e\n\u003cp\u003eThe interior features eight cylindrical elastomeric shock mounts attached directly to the shoulder of the case, providing 2 inches (5.1 cm) of sway space to buffer sensitive equipment from shocks and vibration. The front and rear lids measure 2.2 inches (5.6 cm) and 5.2 inches (13.2 cm) deep, respectively, and both are equipped with molded-in 3.25-inch (82.6 mm) edge casters for effortless mobility. Four plastic comfort-grip handles allow ergonomic handling and transportation.\u003c\/p\u003e\n\u003cp\u003eThe rugged molded-in rib design enhances stacking stability and interlocking capabilities. Durable spring-loaded stainless steel hardware finished in nickel black ensures secure locking and longevity. The case includes a closed-loop gasket and integrated pressure relief valve to maintain waterproof and dustproof integrity. Dual removable lids provide convenient two-sided access, simplifying equipment installation and maintenance. This versatile case is suited for audio\/video production, broadcast, satellite communication, scientific research, and industrial use.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured in durable Black-463 blended resin\u003c\/li\u003e\n\u003cli\u003e24-inch (61 cm) deep light-duty steel rack frame with zinc black finish\u003c\/li\u003e\n\u003cli\u003eEight cylindrical elastomeric shock mounts for vibration isolation\u003c\/li\u003e\n\u003cli\u003eFour plastic comfort-grip handles for ergonomic transport\u003c\/li\u003e\n\u003cli\u003eMolded-in 3.25-inch (82.6 mm) edge casters for smooth mobility\u003c\/li\u003e\n\u003cli\u003e2 inches (5.1 cm) of sway space for shock absorption\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear lids for dual-side access\u003c\/li\u003e\n\u003cli\u003eMolded-in rib design for secure stacking and interlock\u003c\/li\u003e\n\u003cli\u003eSpring-loaded stainless steel hardware with nickel black finish\u003c\/li\u003e\n\u003cli\u003eClosed-loop gasket and integrated pressure relief valve\u003c\/li\u003e\n\u003cli\u003eSupports payloads up to 45.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drava Shop","offers":[{"title":"Default Title","offer_id":51433317761366,"sku":"BLACKBOX-14U-M6","price":2704.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/5641\/8969\/files\/peli_rack_case_blackbox14u_open.jpg?v=1759052555"},{"product_id":"peli-blackbox-9u-rack-mount-case-long-version","title":"Peli BlackBox 9U Rack Mount Case Long Version","description":"\u003cp\u003eThe Peli BlackBox 9U 30-inch Rack Mount Case is a rugged and reliable enclosure designed for professionals who require secure transport and durable protection for their 19-inch rack-mount equipment with extended depth. Made from tough Black-463 blended resin, this case offers superior protection with light to medium-duty shock performance. Its 30-inch (76.2 cm) deep light-duty steel rack frame with zinc black finish meets ANSI\/EIA 310-C standards and supports payloads up to 45.4 kg.\u003c\/p\u003e\n\u003cp\u003eThe case features eight cylindrical elastomeric shock mounts mounted directly to the case shoulders, providing 2 inches (5.1 cm) of sway space to isolate sensitive equipment from vibrations and shocks effectively. The front and rear lids have interior depths of 2.2 inches (5.6 cm) and 5.2 inches (13.2 cm) respectively, both with molded-in 3.25-inch (82.6 mm) edge casters ensuring easy mobility. Four plastic comfort-grip handles facilitate ergonomic handling and transport.\u003c\/p\u003e\n\u003cp\u003eThe molded-in ribbing provides robust stacking strength and interlocking ability. Durable spring-loaded stainless steel hardware finished in nickel black secures the case contents. Its closed-loop gasket combined with an integrated pressure relief valve ensures an airtight, dustproof, and watertight seal. Dual removable lids allow convenient two-sided access for installation and maintenance of equipment. This case is ideal for audio\/video recording systems, satellite and radio communications, seismic data instrumentation, and other professional fields requiring extended rack depth.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured from durable Black-463 blended resin\u003c\/li\u003e\n\u003cli\u003e30-inch (76.2 cm) deep light-duty steel rack frame with zinc black finish\u003c\/li\u003e\n\u003cli\u003eEight cylindrical elastomeric shock mounts for effective vibration isolation\u003c\/li\u003e\n\u003cli\u003eFour plastic comfort-grip handles for ergonomic handling\u003c\/li\u003e\n\u003cli\u003eMolded-in 3.25-inch (82.6 mm) edge casters for smooth mobility\u003c\/li\u003e\n\u003cli\u003e2 inches (5.1 cm) sway space to absorb shocks\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear lids for dual-side equipment access\u003c\/li\u003e\n\u003cli\u003eMolded-in rib design for secure stacking and interlocking\u003c\/li\u003e\n\u003cli\u003eSpring-loaded stainless steel hardware with nickel black finish\u003c\/li\u003e\n\u003cli\u003eClosed-loop gasket and integrated pressure relief valve for environmental protection\u003c\/li\u003e\n\u003cli\u003eSupports payloads up to 45.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drava Shop","offers":[{"title":"Default Title","offer_id":51433342337366,"sku":"BLACKBOX30-9U-M6","price":2593.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/5641\/8969\/files\/pelican-rackmount-blackbox-9u-30-m6-01.jpg?v=1759053169"},{"product_id":"peli-blackbox-7u-rack-mount-case-long-version","title":"Peli BlackBox 7U Rack Mount Case Long Version","description":"\u003cp\u003eThe Peli BlackBox 7U 30-inch Rack Mount Case is a rugged and reliable enclosure designed to protect 19-inch rack-mount equipment with an extended rack depth, perfect for professionals needing secure transport and storage in demanding conditions. Constructed from durable Black-463 blended resin, the case delivers excellent impact resistance and light to medium-duty protection. It features a 30-inch (76.2 cm) deep light-duty steel rack frame finished with corrosion-resistant zinc black coating, complying with ANSI\/EIA 310-C standards, and supports payloads up to  45.4 kg.\u003c\/p\u003e\n\u003cp\u003eInside, eight cylindrical elastomeric shock mounts attached directly to the case shoulder provide 2 inches (5.1 cm) of sway space to isolate sensitive equipment from shocks and vibrations. The front and rear lids measure 2.2 inches (5.6 cm) and 5.2 inches (13.2 cm) in depth, respectively, both equipped with molded-in 3.25-inch (82.6 mm) edge casters for smooth mobility. Four plastic comfort-grip handles ensure ergonomic handling and ease of transport.\u003c\/p\u003e\n\u003cp\u003eThe molded-in rib design enhances stacking strength and interlocking stability. Durable spring-loaded stainless steel hardware finished with nickel black ensures secure closure. The closed-loop gasket and integrated pressure relief valve maintain an airtight, dustproof, and watertight interior environment. Removable front and rear lids enable convenient dual-side equipment access, simplifying installation and maintenance. The case is ideal for applications in broadcast, satellite communications, audio\/video production, scientific instrumentation, and industrial uses requiring portable and robust rack protection.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured in durable Black-463 blended resin\u003c\/li\u003e\n\u003cli\u003e30-inch (76.2 cm) deep light-duty steel rack frame with zinc black finish\u003c\/li\u003e\n\u003cli\u003eEight cylindrical elastomeric shock mounts for vibration isolation\u003c\/li\u003e\n\u003cli\u003eFour plastic comfort-grip handles for ergonomic transport\u003c\/li\u003e\n\u003cli\u003eMolded-in 3.25-inch (82.6 mm) edge casters for easy mobility\u003c\/li\u003e\n\u003cli\u003e2 inches (5.1 cm) of sway space for shock absorption\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear lids for dual-side access\u003c\/li\u003e\n\u003cli\u003eMolded-in rib design for secure stacking and interlock\u003c\/li\u003e\n\u003cli\u003eSpring-loaded stainless steel hardware with nickel black finish\u003c\/li\u003e\n\u003cli\u003eClosed-loop gasket and integrated pressure relief valve\u003c\/li\u003e\n\u003cli\u003eSupports payloads up to  45.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drava Shop","offers":[{"title":"Default Title","offer_id":51433363767638,"sku":"BLACKBOX30-7U-M6","price":2468.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/5641\/8969\/files\/pelican-rackmount-blackbox-7u-30-m6-01.jpg?v=1759053556"},{"product_id":"peli-blackbox-5u-rack-mount-case-long-version","title":"Peli BlackBox 5U Rack Mount Case Long Version","description":"\u003cp\u003eThe Peli BlackBox 5U 30-inch Rack Mount Case is a rugged and versatile case designed for secure transportation and protection of 19-inch rack-mount equipment in demanding environments. Constructed from durable Black-463 blended resin, this case provides excellent impact resistance and reliable light to medium-duty protection. It features a 30-inch (76.2 cm) deep light-duty steel rack frame with a corrosion-resistant zinc black finish, meeting ANSI\/EIA 310-C standards, and supports payloads up to 45.4 kg.\u003c\/p\u003e\n\u003cp\u003eInside, eight cylindrical elastomeric shock mounts attached directly to the case shoulders provide 2 inches (5.1 cm) of sway space, effectively isolating sensitive equipment from shocks and vibration during transport and use. The front and rear lids have interior depths of 2.2 inches (5.6 cm) and 5.2 inches (13.2 cm) respectively, both equipped with molded-in 3.25-inch (82.6 mm) edge casters for easy mobility. Four plastic comfort-grip handles enhance ergonomic handling and ease of transport.\u003c\/p\u003e\n\u003cp\u003eThe molded-in rib design offers robust stacking strength and interlocking capabilities. Spring-loaded stainless steel hardware with a nickel black finish ensures secure closure and long-lasting durability. The closed-loop gasket and integrated pressure relief valve maintain an airtight and watertight environment protecting the case contents from dust and water ingress. Removable front and rear lids allow convenient dual-side access for installation and maintenance of equipment. The BlackBox 5U is ideal for applications including broadcast, audio\/video production, satellite and radio communications, as well as scientific and industrial fields.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured from durable Black-463 blended resin\u003c\/li\u003e\n\u003cli\u003e30-inch (76.2 cm) deep light-duty steel rack frame with zinc black finish\u003c\/li\u003e\n\u003cli\u003eEight cylindrical elastomeric shock mounts for vibration isolation\u003c\/li\u003e\n\u003cli\u003eFour plastic comfort-grip handles for ergonomic transport\u003c\/li\u003e\n\u003cli\u003eMolded-in 3.25-inch (82.6 mm) edge casters for mobility\u003c\/li\u003e\n\u003cli\u003e2 inches (5.1 cm) sway space to absorb shocks\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear lids for dual-side access\u003c\/li\u003e\n\u003cli\u003eMolded-in rib design for secure stacking and interlocking\u003c\/li\u003e\n\u003cli\u003eSpring-loaded stainless steel hardware with nickel black finish\u003c\/li\u003e\n\u003cli\u003eClosed-loop gasket and integrated pressure relief valve\u003c\/li\u003e\n\u003cli\u003eSupports payloads up to 45.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drava Shop","offers":[{"title":"Default Title","offer_id":51433375465814,"sku":"BLACKBOX30-5U-M6","price":2349.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/5641\/8969\/files\/pelican-rackmount-blackbox-5u-30-m6-rackgehause.jpg?v=1759053837"},{"product_id":"peli-blackbox-3u-rack-mount-case-long-version","title":"Peli BlackBox 3U Rack Mount Case Long Version","description":"\u003cp\u003eThe Peli BlackBox 3U 30-inch Rack Mount Case is a lightweight yet highly durable solution engineered for professionals who require reliable protection and transport for their 19-inch rack equipment. Crafted from tough Black-463 blended resin, it offers excellent impact resistance and light to medium-duty shock protection. The case features a 24-inch (61 cm) deep light-duty steel rack frame with a corrosion-resistant zinc black finish, engineered to carry payloads up to 45.4 kg while complying with ANSI\/EIA 310-C standards.\u003c\/p\u003e\n\u003cp\u003eEquipped with eight cylindrical elastomeric shock mounts mounted directly to the case shoulders, the BlackBox 3U provides 2 inches (5.1 cm) of sway space to isolate sensitive components from shocks and vibrations during transport. The front and rear lids measure 2.2 inches (5.6 cm) and 5.2 inches (13.2 cm) deep respectively, and both are fitted with molded-in 3.25-inch (82.6 mm) edge casters to facilitate smooth portability. Four plastic comfort-grip handles provide ergonomic handling.\u003c\/p\u003e\n\u003cp\u003eThe molded-in rib design enhances stacking capability and structural stability, while spring-loaded stainless steel hardware finished in nickel black ensures secure closure and long-term durability. The closed-loop gasket and built-in pressure relief valve maintain an airtight and watertight seal to protect contents from dust and moisture. Dual removable lids offer easy front and rear access for installation and service. This case is ideal for applications such as audio\/video production, satellite and radio communications, scientific instrumentation, and industrial use.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured in durable Black-463 blended resin\u003c\/li\u003e\n\u003cli\u003e24-inch (61 cm) depth light-duty steel rack frame with zinc black finish\u003c\/li\u003e\n\u003cli\u003eEight cylindrical elastomeric shock mounts for vibration isolation\u003c\/li\u003e\n\u003cli\u003eFour plastic comfort-grip handles for ergonomic handling\u003c\/li\u003e\n\u003cli\u003eMolded-in 3.25-inch (82.6 mm) edge casters for easy mobility\u003c\/li\u003e\n\u003cli\u003e2 inches (5.1 cm) sway space for shock absorption\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear lids for dual access\u003c\/li\u003e\n\u003cli\u003eMolded-in rib design for stacking and interlock\u003c\/li\u003e\n\u003cli\u003eSpring-loaded stainless steel hardware with nickel black finish\u003c\/li\u003e\n\u003cli\u003eClosed-loop gasket and integrated pressure relief valve\u003c\/li\u003e\n\u003cli\u003eSupports payloads up to 45.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drava Shop","offers":[{"title":"Default Title","offer_id":51433413968214,"sku":"BLACKBOX30-3U-M6","price":2236.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/5641\/8969\/files\/pelican-rackmount-blackbox-3u-30-m6-rackgehause.jpg?v=1759054353"}],"url":"https:\/\/drava.shop\/collections\/blackbox-rack-cases.oembed","provider":"Drava Shop","version":"1.0","type":"link"}