CRDBAG GRID DIVIDE WALL Expansion Long Kit

The CRDBAG GRID DIVIDE WALL Expansion Long Kit is the add-on component for photographers, filmmakers, and field professionals who have outgrown the reach of the Universal Kit's standard short walls. Three extra-long EVA divider walls — each approximately 520 mm (20.5 inches) in length — and eight hook & loop connectors let you span full case widths, create uninterrupted partition lines, and organise longer items that shorter walls simply cannot contain. This is the kit that transforms a functional GRID DIVIDE WALL layout into one that fills the entire footprint of a hard carry-on or transport case without gaps or compromises.

What the Expansion Long Kit Contains

The kit ships with three long EVA divider walls and eight hook & loop fabric connectors. Each wall is manufactured from the same closed-cell EVA foam used throughout the GRID DIVIDE WALL system — flexible enough to bend around gentle curves, firm enough to hold its shape and resist collapse under the weight of neighbouring equipment. The hook & loop connectors provide secure, tool-free attachment between walls and to each other, allowing them to be joined in straight, angled, or open configurations depending on your packing requirements. Because the materials and dimensions are consistent with the Universal Kit, the Expansion Long Kit integrates without adaptation.

Designed for Long, Wide, and Full-Width Layouts

The 520 mm wall length addresses a gap that the standard short walls cannot close: spanning the full interior width of medium and large hard transport cases in a single unbroken run. Without long walls, photographers packing telephoto lenses, video stabilisers, full-frame film cameras, or gimbal arms must either subdivide the span with several short walls joined end-to-end — creating alignment challenges — or leave sections of the case unsupported. The Expansion Long Kit solves this with a single-piece span that covers the width cleanly. You can also combine a long wall with short walls to create asymmetric compartment layouts that match the actual shape of your equipment rather than forcing gear into rectangular zones.

Compatible Exclusively with the GRID DIVIDE WALL System

The Expansion Long Kit is an expansion, not a standalone product. It requires an existing CRDBAG GRID DIVIDE WALL Universal Kit as the structural foundation of the layout. The Universal Kit provides the base panel, short walls, and initial connectors that define the grid; the Long Kit then extends and refines the partitioning to meet specific use cases. When combined, the two kits cover the complete range of layout shapes — tight subdivisions from short walls, full-width separation from long walls, and infinite hybrid configurations in between. The foam-free system uses no adhesives, no cutting, and no permanent modifications to your case.

Reconfigure Without Tools or Permanent Changes

Every element of the GRID DIVIDE WALL system — including the long walls and connectors in this kit — attaches and detaches using hook & loop closures. You can rebuild an entire layout in minutes to adapt to a different shoot, a different case, or a different set of equipment. This matters when your carry-on holds camera bodies on one trip and drone components on the next: the system remoulds to both without leaving marks on the case interior. Because nothing is glued, cut, or permanently fixed, the long walls can be repositioned or removed entirely whenever requirements change.

Who Uses the Expansion Long Kit

This kit is used by photographers carrying telephoto primes and zoom lenses that exceed 400 mm in length, videographers packing cinema-grade cameras with rails attached, drone operators organising motors and propeller arms inside transport cases, and any field professional whose equipment demands full-width partitioning rather than clustered subdivisions. It is also the natural complement for users of the GRID DIVIDE WALL Expansion Short Kit who want both wall lengths available within the same layout — mixing long walls for the primary division and short walls for finer organisation within each compartment.

Technical Specifications

Contents: 3 long EVA divider walls (approx. 520 mm / 20.5 in each) + 8 hook & loop connectors • System: CRDBAG GRID DIVIDE WALL (Universal Kit required) • Attachment: tool-free hook & loop fabric closures • Wall material: closed-cell EVA foam • Configurations: straight, angled, curved, T-junction, hybrid with short walls • Modifications: none required • SKU: CRD_ACC_073