Large area light POWERCASE M Basic 230V AC on/off 59 000 lm

Product overview

The SONLUX POWERCASE M Basic (80M06000-0006) is a compact, high-output large-area luminaire designed for fast, repeatable lighting of work zones. It combines a wide-beam optical concept with a rugged, jobsite-friendly build, so crews can deploy strong area light without delicate handling or time-consuming setup. This model is a practical choice when you want a reliable “plug-and-work” solution that travels well, mounts quickly, and delivers a broad illuminated footprint for safer movement and clearer task visibility.

POWERCASE M Basic focuses on straightforward operation. It uses an on/off control concept with a professional-grade power cable and a mounting system built around DIN 14640. That combination matters in the field because it helps standardise setups across teams and locations. You can lift the luminaire on a mast for maximum coverage, or suspend it when ground space must remain clear and trip hazards must be minimised.

Wide-area light that supports safer workflows

This model produces 59,000 lm at 5000 K, a daylight-like tone that supports contrast and orientation in busy zones. It is designed to illuminate “the whole working area” rather than creating a narrow hotspot. That difference is important on real sites because wide, even coverage helps reduce dark corners around pallets, barriers, machines, and vehicle lanes. When people and equipment share the same space, predictable coverage supports safer movement and smoother coordination.

Optics built for broad coverage

The luminaire uses high-efficiency LED units with clear plastic (PC) lens optics for controlled light distribution. With a very wide beam (155°/159°), it is well suited for staging areas, loading zones, temporary perimeters, and open work platforms. The goal is to create a usable footprint that stays consistent across typical mounting heights, so you spend less time relocating lights and more time working.

Glare awareness on high-output area lights

POWERCASE M Basic is designed for strong output and wide spread, and that comes with a simple rule: placement matters. The glare evaluation is specified as RUG (4H/8H) 36, which means you get the best comfort when you choose the right mounting height and keep the main beam away from direct sightlines. In practice, raising the luminaire often improves comfort because it pushes the brightest zone higher and spreads light over a larger footprint.

Rugged construction for daily transport and deployment

The housing is built from powder-coated aluminium with corners protected by plastic caps, a practical combination for frequent handling. This is the type of equipment that moves between vans, warehouses, and work zones, so edges and corners need protection in everyday use. The unit is supplied with a robust PUR power cable intended for high mechanical loads, helping reduce downtime caused by cable damage in busy environments.

Carrying bag included for easier logistics

POWERCASE M Basic includes a carrying bag, supporting cleaner packing and faster moves between sites. When lighting is deployed repeatedly, transport accessories matter because they reduce friction at the start and end of a shift. A proper bag also helps keep the luminaire protected during storage and prevents smaller parts from going missing.

Professional mounting: DIN 14640 and flexible inclination angles

For many crews, the mounting interface is just as important as lumen output. This model includes an adapter for spigot mounting (d = 30 mm) conforming to DIN 14640. The adapter supports both straight mounting and inclined mounting at 30°, 60°, or 90°. This gives you control over where the light goes without forcing you to move the entire stand.

Inclination is useful when you want to keep the tripod footprint outside of vehicle lanes or pedestrian routes while still aiming the light into the working area. It also helps when you suspend the luminaire and want the beam directed toward a specific zone, such as a staging corner, a loading edge, or a barrier line.

Power and electrical behaviour for site planning

POWERCASE M Basic is rated at 376 W system power with a specified efficiency of 157 lm/W. For planning circuits on site, SONLUX specifies how many luminaires can be run per typical fuse type: up to 2 units on B16A and 3 units on C16A, depending on your installation. The inrush current is specified as 126.4 A with an inrush duration of 760 µs, which is relevant when you power multiple units on the same circuit and want predictable start-up behaviour.

What is included

NOTE: The product includes the POWERCASE M Basic luminaire (80M06000-0006), a 30 mm DIN 14640 spigot adapter with straight or inclined mounting (30°, 60°, 90°), and a carrying bag. Tripods (masts), suspension accessories, and any additional mounting hardware are selected separately according to your setup.

Basic technical specifications

Specification	Value
Product	SONLUX POWERCASE M Basic
Article	80M06000-0006
Dimensions (L × W × H)	695 × 705 × 125 mm
Weight	11.4 kg
Housing	Aluminium, powder-coated; corners protected by plastic caps
Optics	Clear plastic (PC) lens optics
Supply cable / plug	10 m, H07BQ-F, 3 × 1.5 mm² / Type E+F (CEE 7/7)
Light source	LED
Colour temperature	5000 K
Rated luminous flux	59,000 lm
System power	376 W
System efficiency	157 lm/W
Beam angle	155° / 159°
Glare evaluation	RUG (4H/8H) 36
LED rated life	60,000 h (L80/B50)
CRI	80
Colour tolerance	3 SDCM (McAdam)
Photobiological safety (EN 62471)	Risk group 0
Driver	Converter
Control	on/off
Luminaires on B10A fuse	1
Luminaires on B16A fuse	2
Luminaires on C10A fuse	2
Luminaires on C16A fuse	3
Inrush current / duration	126.4 A / 760 µs
CIE / CEN flux code	37 67 89 96 100
Conformity mark	CE
Mounting	Tripod mounting or suspended
Interface	Spigot adapter d = 30 mm, DIN 14640; straight or 30°/60°/90° inclined
Included	Spigot adapter + carrying bag

Where this luminaire fits best

POWERCASE M Basic is a strong match for teams that need dependable, wide-area lighting with simple operation. It is ideal for construction staging zones, industrial maintenance areas, logistics yards, and temporary perimeters where you want broad coverage, quick setup, and a standardised DIN 14640 interface. Use tripod mounting to expand the illuminated footprint, or suspend the luminaire to keep the ground clear and reduce trip risks in busy lanes.

NOTE: The product includes only the lamp. Masts (tripods) and any additional accessories are sold separately and can be selected as optional accessories.