Lid 4 Pouch Mesh Organizer for Peli Air 1535 Peli 1510 Storm im2500
Available in stock (14)
The inside of a Peli lid is one of the most underused storage surfaces in professional kit — large, flat, and directly visible when the case is open. The Lid 4 Pouch Mesh Organizer turns that space into four structured, transparent pockets that keep smaller items sorted, visible, and immediately reachable without unpacking the base. Compatible with the Peli 1510, Peli Air 1535, and Storm IM2500, it mounts directly to the factory pre-drilled holes in the lid or attaches with hook-and-loop strips — no modifications required.
The four pockets are made from clear PVC rather than opaque fabric. Everything inside is visible through the pocket face, so you can identify contents at a glance without unzipping anything. Hidden zippers keep the front surface clean and professional, with no exposed pull tabs cluttering the organiser face when the pockets are closed.
Four Clear PVC Pockets — See Everything, Reach Anything
Each of the four pockets has a transparent PVC face that lets you see exactly what is inside without touching the organiser. This is particularly useful for items you need fast access to — charging cables, SD cards, spare fuses, lens cleaning kits, or documentation — where a visible, dedicated slot is faster than searching through a general accessories bag.
The clear PVC wipes clean easily and holds its transparency over time without yellowing from UV exposure or cracking in cold temperatures. Unlike fabric mesh, PVC resists moisture ingress, keeping contents protected even if the case is briefly exposed to rain or condensation during transport.
The four pockets are arranged in a removable panel layout. Individual pockets can be detached and repositioned, allowing you to configure the organiser to suit different load-outs — taller items in one pocket, flat documents in another, without being locked into a fixed grid.
Hidden Zippers and 600D Nylon Backing
The zippers on the organiser are designed with hidden pulls, giving the panel a flat, uncluttered appearance when closed. There are no exposed zip pulls to snag on cables or catch on foam inserts when the case is opened and closed quickly. The zippers are flush with the surface of each pocket, maintaining a professional look whether the organiser is used in a studio, on location, or in a client-facing environment.
The backing panel is 600D polyester nylon — the same weight used in hardwearing range bags and equipment pouches. This provides the structural rigidity needed to hold the organiser flat against the lid under load, without sagging or pulling away from its mounting points during transit. Reinforced stitching at the pocket attachment points and along the mounting edges ensures the panel retains its shape through repeated use and repacking cycles.
Compatible Cases — Peli 1510, Peli Air 1535, and Storm IM2500
This organiser is designed and tested to fit the following cases:
- Peli 1510 Carry-On Case — the original Peli cabin-size case for camera systems, audio equipment, medical devices, and precision instruments
- Peli Air 1535 — the lightweight Air series version sharing the same interior footprint, preferred where carry-on weight limits are critical
- Storm IM2500 — the injection-moulded Storm series case with equivalent interior dimensions and matching pre-drilled lid mounting points
All three cases share the same lid mounting hole pattern, so the organiser drops straight in with the six included screws. If you run multiple cases across the range, the same organiser transfers between them without any adjustment. The organiser has also been reported to fit the Nanuk 935 by some users, though compatibility with cases outside the listed models is not guaranteed.
What's in the Box and How to Install
Each organiser ships complete and ready to fit:
- 1 × four-pocket clear PVC lid organiser panel with hidden zippers
- 6 × mounting screws sized for the factory pre-drilled holes
- Hook-and-loop mounting strips pre-applied to the rear of the backing panel
For tool-free installation: press the rear hook-and-loop strips against the corresponding strips inside the case lid. The panel sits flat and secure for normal use and releases cleanly when you need the full lid space. For permanent or high-vibration applications — such as cases mounted in vehicles or handled repeatedly in rough field conditions — use the six included screws anchored into the pre-drilled lid holes. A standard screwdriver is all that is required; typical install time is under three minutes.
SKU: LID1519F. Sold as a single organiser panel. Peli cases are not included.
Couldn't load pickup availability
Technical Data
Technical Data
Applications
Applications

