Lid Pouch Mesh Organizer for Peli Air 1535 Peli 1510 Storm im2500
Out of stock
Peli cases offer some of the most reliable protection available for field equipment — but the lid space is wasted without an organiser. The Lid Pouch Mesh Organizer converts the inside of your Peli 1510, Peli Air 1535, or Storm IM2500 lid into a structured, immediately accessible storage zone for cables, documents, tools, spare batteries, pens, and the dozens of small accessories that otherwise rattle loose in the base of the case. Seven individual zippered mesh pockets keep every item visible, separated, and reachable the moment you open the lid.
The organiser mounts directly to the lid using hook-and-loop strips — removable in seconds — or can be screwed permanently into the pre-drilled mounting points already built into compatible Peli lids. No drilling, no adhesives, no permanent modifications to the case.
Seven Zippered Pockets — Granular Control Over Every Accessory
Seven individual mesh pockets, each with its own zip, give you precise control over storage layout. The default configuration provides six smaller pockets — sized for SD cards, pens, multi-tools, short cables, filters, batteries, and other compact items — plus one larger pocket for documents, printed job sheets, tablet computers, or wider accessories. Every pocket uses a mesh fabric face, so you can read labels and identify contents at a glance without opening anything. No digging, no guessing, no spilled accessories on the work surface.
The larger pocket is created by opening the zip that divides two adjacent smaller pockets and joining them into a single wider compartment. Switch between a six-pocket and a seven-pocket layout in seconds, adapting to whatever the current job requires without carrying a different organiser for different configurations. When you need the smaller pockets back, close the divider zip and everything returns to its previous layout instantly.
All zips are smooth-running and sized to be operated with gloves or cold fingers. Zip pulls are long enough to grab without looking, which matters in low-light environments where cases are opened and repacked under pressure.
600D Nylon Construction — Built to Outlast the Accessories Inside It
The organiser panel is made from 600D polyester nylon — the same fabric weight used in hardwearing range bags, camera cases, and tool pouches expected to survive years of daily use. 600D provides the right balance of structure and flexibility: stiff enough to hold its shape when loaded with heavier items such as cables or multi-tools, flexible enough to compress slightly as the case closes without putting stress on the zip teeth.
Double-stitched seams reinforce the points of highest stress: around the zip tracks, along the outer mounting edges, and at the corners where the panel contacts the lid under load. The mesh pocket faces are bartack-stitched to the backing panel at each corner for additional tear resistance. Hook-and-loop strips along the perimeter edges are sewn — not adhesive-backed — so they will not peel away with temperature changes or repeated mounting cycles.
The panel wipes clean with a damp cloth. For heavier soiling it can be hand-washed and air-dried without affecting hook-and-loop performance or zip function.
Compatible Cases — Peli 1510, Peli Air 1535, and Storm IM2500
This organiser is sized and fitted specifically for the following cases:
- Peli 1510 Carry-On Case — the original Peli cabin-size case, widely used for camera systems, audio equipment, medical devices, and fragile instruments requiring airline carry-on protection
- Peli Air 1535 — the lightweight Air series version sharing the same footprint, preferred when carry-on weight allowance is a limiting factor
- Storm IM2500 — the injection-moulded Storm series case with equivalent interior dimensions and the same pre-drilled lid mounting points
All three cases share compatible lid dimensions and factory pre-drilled mounting holes, so the organiser fits flush and secure without modification. If you upgrade from a Peli 1510 to a Peli Air 1535, the same organiser transfers without any adjustment.
What's in the Box and How to Install
Each unit ships complete and ready to install:
- 1 × mesh lid organiser panel (seven zippered pockets, convertible layout)
- 6 × mounting screws for the pre-drilled lid holes
- Hook-and-loop strips pre-applied to the panel perimeter edges
Hook-and-loop installation takes under two minutes and requires no tools: open the case, press the organiser panel against the lid surface, and align the hook-and-loop edges. The panel stays firmly in position during normal use and comes away cleanly when you need the full lid space. For permanent or high-vibration applications — such as cases that travel in vehicles or are handled frequently in rough conditions — use the six included screws to anchor the panel to the pre-drilled holes. A standard screwdriver is all that is required.
SKU: LID1519MC7. Sold as a single organiser panel. Peli cases are not included.
Couldn't load pickup availability
Technical Data
Technical Data
Applications
Applications

