Replacement Latches and Handles Set for Peli Case 1510 1560 Silver

A Peli case is built for a lifetime of demanding service — but its exterior hardware can show wear long before the case itself gives up. Latches stiffen, handles crack, and the hardware that takes the most daily punishment is the first to need attention. This genuine Peli replacement set restores the exterior of the 1510 and 1560 Protector series to exactly the condition it was in when the case left the factory. In classic silver-grey, these components match the neutral metal-finish hardware that has always been standard on Peli Protector cases, giving a clean, professional result without a trace of mismatched colour.

What Is in the Set

The set contains all the hardware a case needs on its exterior:

• 2 × Original Peli medium push-button latches (silver)
• 1 × Original Peli medium handle (silver)
• 1 × Original Peli small handle (silver)

Every component is a genuine Peli part — not an aftermarket alternative — so fit, function and long-term durability match exactly what came on your case originally.

Note on hinge pins: Pins are not included in the set. The original pins from your existing hardware can almost always be reused — tap them out with a punch and a light hammer, transfer them to the new components, and tap them back in. If you need spare pins, note it in your order comments and we will arrange them.

Silver Hardware — the Neutral, Professional Choice

Silver sits at the classic end of the Peli colour palette. On a standard black shell it precisely replicates the factory-original look. On tan, olive drab or grey cases, silver reads as technical and understated — it does not compete with colour-coded markings, high-visibility accessories or team kit. For users working in broadcast, medical, scientific or military environments where consistent, professional presentation matters, silver is the obvious choice for restoration work.

If your case originally came with silver hardware and you want to return it to factory condition — rather than use it as an opportunity to add colour — this is the set you need.

Precision-Designed for the Peli 1510 and 1560

Every dimension in this set is engineered around the Peli 1510 Carry-On Protector and the Peli 1560 Protector Case. The medium push-button latches measure 36 mm × 65 mm and weigh just 0.026 kg each — an entirely negligible contribution to your carry-on weight allowance. The two-step push-button mechanism latches with a firm click and releases with a clean, deliberate push. There is no fiddling with catches when your hands are full and conditions are less than ideal.

Your Lifetime Guarantee Stays Intact

Peli's Legendary Lifetime Guarantee covers the full case. Using genuine Peli replacement parts keeps that guarantee fully valid. Aftermarket substitutes may not achieve the precise fit required to maintain the case's IP-rated dust and water resistance, and some non-original components can void the warranty altogether. With this set, you carry out a repair that Peli itself recommends — using parts it manufactured and tested for this purpose.

Installation in About 15 Minutes

No specialist tools or technical knowledge are required. The process is straightforward:

1. Knock the hinge pin out of the old latch or handle using a punch and a light hammer. Never use a screwdriver — it can splay the pin and damage both the pin and the case body.
2. Remove the worn component from its mounting point.
3. Position the new latch or handle in the slot and align the pin holes.
4. Tap the pin back in gently from the same side it came out.

The result is hardware that operates as smoothly as it did when the case was new. The whole process takes around 15 minutes and the case is immediately ready to go back into service.

One Case, Decades of Service

A Peli Protector case is an investment designed to protect what matters most for the long term. The waterproof shell, airtight seal and interior foam can keep sensitive equipment safe for decades — but only if the exterior hardware is maintained. Replacing a stiff latch or a cracked handle extends that service life significantly, avoiding the far greater cost of replacing the entire case. Whether you are restoring a well-travelled personal case, maintaining fleet equipment or refurbishing surplus cases for new use, this replacement set delivers manufacturer-quality results at a fraction of the cost of a new case.