Skid-Mate Pallet Pad Orange (M8) - from 56kg to 102kg

Skid-Mate Orange M8 – heavy-load pallet damping pad for shock and vibration

When a shipment is heavy, the handling forces grow fast. A forklift bump that is harmless for a light pallet can be brutal for a heavy one. Long-distance transport adds constant vibration. Dock plates add repeated impacts. If the base is rigid, most of that energy goes straight into the load. Skid-Mate Orange is designed to reduce those forces at the pallet level. It creates a damped interface between the ground and your pallet base. This helps protect equipment, crates, and cases during rough logistics.

Orange is the heavy-load class in the Skid-Mate system. It is made for higher weight per pad than Green, Tan, Yellow, or Blue. That makes it suitable for heavier pallets and dense payloads. Correct loading is the key. Damping pads work best inside their target range. If overloaded, the pad can bottom out. If underloaded, damping becomes less effective. Orange helps you keep heavy builds in the right working window.

Our version is built for metric installations. It uses an M8 threaded fitting. This listing is for the pad only. We sell it without screws and without the spacer. The spacer is a separate product. Use it only when additional pallet-jack clearance is required.

Orange load class in metric terms

The Orange pad is designed for 56.7–102.1 kg per pad. This range corresponds to 125–225 lb per pad. It is a practical choice for heavy pallet builds. It also helps when you want fewer pads while staying within range. The goal is consistent loading on every support point.

Orange is often chosen for heavy flight case pallets. It is also used for industrial assemblies and dense electronics racks. In these scenarios, the load is expensive and difficult to replace. Improving the base isolation can reduce damage risk and downtime.

Sold as pad only

Mounting methods vary a lot between customers. Some mount to wooden pallets. Some use metal skid frames. Some integrate pads into custom base plates. That is why this product is sold as pad only. You choose the correct hardware for your build. You also control bolt length and washers. This supports consistent torque and service routines.

The M8 standard simplifies logistics. It keeps your spare parts metric. It also matches common European workshop stock. For long-term operations, that matters more than it seems.

How to plan pad count

Start with a stable base

Begin with one pad per corner. That gives four support points. For long pallets, add mid supports. For tall loads, add pads to improve stability.

Check load per pad

Divide total load weight by pad count. Aim for 56.7–102.1 kg on each Orange pad. If you exceed the range, add pads or split the load. If you are far below the range, use a lower load class.

Keep weight distribution even

Damping works best with balanced contact. Avoid point loads and twisted bases. Use a rigid, flat pallet frame. Ensure every pad touches and carries weight.

Dimensions and clearance planning

The pad is a compact, round element designed for pallet bases. Typical diameter is about 153 mm. Typical height is about 73 mm without the spacer. If you need extra clearance for pallet jacks, use the separate spacer product. Do not improvise with blocks or uneven shims. Consistent height is essential for load sharing.

What you receive

You receive one Skid-Mate Orange M8 damping pad. Screws are not included. Spacer is not included. If you need the spacer, order it separately.

Basic technical data

Notes

Correct loading is essential for performance. Keep each pad within the load range. Avoid uneven contact and point loads. Use a rigid pallet base for stable load sharing. Inspect pads regularly in high-turn logistics. Replace pads that show deep deformation or damage.